基于玻璃化转变的稻谷变温热风干燥工艺研究

为保证稻谷干燥后品质、提高干燥效率,基于不同含水率稻谷的玻璃化转变温度,提出变温热风干燥工艺。采用三因素五水平中心组合试验方法,以稻谷温度、初始含水率和热风风速为影响因素,以稻谷爆腰指数、整精米率和干燥时间为评价指标,研究稻谷玻璃化转变温度、恒温和变温干燥特性,模拟解析稻谷干燥过程中传热传质规律,以5、10、15℃的变温幅度进行变温干燥试验。结果表明,稻谷玻璃化转变温度与其含水率呈负相关,恒温干燥最佳工艺参数为稻谷温度47℃、初始含水率22.0%、热风风速0.50 m/s,干燥后稻谷爆腰指数70、整精米率57.67%、干燥时间195 min;与恒温干燥相比,以5℃和10℃为变温幅度的变温干燥工艺,干燥后稻谷爆腰指数分别降低了20和10,整精米率提高12.6、7.7个百分点,干燥时间缩短30 min和60 min。研究表明,基于玻璃化转变的稻谷变温热风干燥工艺明显改善了稻谷干燥后品质,提高了干燥效率。     

冷热破碎工艺对小包装番茄酱贮藏期间非酶褐变的影响

为探究冷破碎工艺和热破碎工艺对番茄酱贮藏期间非酶褐变的影响,将制备的番茄酱在20℃和35℃条件下进行12个月的贮藏。通过对番茄酱的褐变指数、还原糖、番茄红素、5-HMF、VC含量、氨基酸态氮含量、可滴定酸含量和pH变化的测定以及相关性分析得出美拉德反应与VC氧化分解反应是导致番茄酱在贮藏期间发生非酶褐变的主要原因,番茄红素不是引起番茄酱色泽变化的主要原因,美拉德反应的主要产物是5-HMF。经过液相色谱分析,番茄酱中糖类主要由果糖、葡萄糖和蔗糖组成,冷破、热破番茄酱中的三种糖类含量有差异。通过模拟体系,进一步确定了美拉德反应是导致番茄酱在贮藏期间发生非酶褐变的根本原因,且糖是5-HMF生成的必要条件,5-HMF的产生主要由果糖决定,VC氧化分解反应对5-HMF的生成贡献微弱。因冷破碎工艺温度较低,产品果糖含量较多,更容易褐变,所以冷破番茄酱的贮藏环境应尽可能的保证低温。     

面向智能油田的集输管网工艺模拟软件研制

针对集输管网多相输送体系、不同拓扑结构及输送工艺在数字油田智能化建设中的仿真模拟需求,基于图论方法和管网对象设计了可表示复杂连接关系的通用管网数据结构,耦合流动单元水热力数学模型与节点平衡关系建立了普适性的管网非线性方程组,提出了鲁棒性高的求解方法。以油田集输工艺设计、运行及优化等场景中独立使用或在综合管理系统中集成应用为目标研制了计算软件,通过对比商业软件计算结果,验证了所开发软件的适应性和准确性,同时从工程实用方面探讨了其应用前景。     

拖拉机室内台架试验技术现状与展望

作为拖拉机研发的重要验证手段，拖拉机室内台架试验可方便高效地为拖拉机模拟各种工况下的性能表现。首先探究动力总成控制技术、负载模拟技术、试验数据处理技术和试验结果评价技术4种拖拉机室内台架试验关键技术，结合试验技术的最新研究进展，对4种技术进行详细的阐述和分析。接着从动力总成控制算法、负载模拟算法、试验数据处理方法、试验结果评价指标体系4个方面对拖拉机室内台架试验技术进行讨论与展望。最后得出对动力总成算法进行优化、提高动态负载模拟精度、保持试验数据处理方法的前沿性、对试验结果综合客观评价是拖拉机室内台架试验技术的发展趋势，以期为我国拖拉机室内台架试验技术的发展提供参考。     

Estimation of irrigation requirements for drip-irrigated maize in a sub-humid climate

Drip-irrigation is increasingly applied in maize (Zea mays L.) production in sub-humid region. It is critical to quantify irrigation requirements during different growth stages under diverse climatic conditions. In this study, the Hybrid-Maize model was calibrated and applied in a sub-humid Heilongjiang Province in Northeast China to estimate irrigation requirements for drip-irrigated maize during different crop physiological development stages and under diverse agro-climatic conditions. Using dimensionless scales, the whole growing season of maize was divided into diverse development stages from planting to maturity. Drip-irrigation dates and irrigation amounts in each irrigation event were simulated and summarized in 30-year simulation from 1981 to 2010. The maize harvest area of Heilongjiang Province was divided into 10 agro-climatic zones based on growing degree days, arid index, and temperature seasonality. The simulated results indicated that seasonal irrigation requirements and water stress during different growth stages were highly related to initial soil water content and distribution of seasonal precipitation. In the experimental site, the average irrigation amounts and times ranged from 48 to 150 mm with initial soil water content decreasing from 100 to 20% of the maximum soil available water. Additionally, the earliest drip-irrigation event might occur during 3- to 8-leaf stage. The water stress could occur at any growth stages of maize, even in wet years with abundant total seasonal rainfall but poor distribution. And over 50% of grain yield loss could be caused by extended water stress during the kernel setting window and grain filling period. It is estimated that more than 94% of the maize harvested area in Heilongjiang Province needs to be irrigated although the yield increase varied (0 to 109%) in diverse agro-climatic zones. Consequently, at least 14% of more maize production could be achieved through drip-irrigation systems in Heilongjiang Province compared to rainfed conditions.     

水流作用下一种养殖金属网衣水阻力特性的数值模拟研究

为保障深远海金属网箱养殖系统的结构安全,进行网箱结构的水动力学研究是一项重要的工作。构成金属网箱主要组成部分的金属网衣是一种小直径多孔的网状结构,在波浪和水流作用下的水动力学特性与一般的海洋工程结构物有显著不同。本文基于有限元基本原理,采用梁单元模拟金属网线结构,采用连接单元模拟网线接触部位的相互作用,并运用ABAQUS软件进行数值计算,在试验验证的基础上,分析了在水流作用下一种金属菱形链网衣在不同网目尺寸、不同网线直径情况下的水阻力变化情况。数值模拟结果表明在各种工况下,当网目尺寸由25 mm增加到35 mm、45 mm时,网衣受力增加幅度的平均值分别为14.71%和38.07%;当网线直径由2.5 mm增加到3.2 mm、4.0 mm时,各工况下网衣受力增加幅度的平均值分别为25.05%和45.06%。研究结果可以为进一步开展深海养殖金属网箱水动力特性研究提供积极的基础。     

粉碎机异形筛片气流场数值模拟及试验研究

针对传统环筛式锤片饲料粉碎机存在气固环流层影响粉碎机性能的问题,采用理论分析、数值模拟、粉碎性能试验相结合的方法,对粉碎机安装异形筛片时粉碎室内物料颗粒受到的气力作用和内部流场运动规律进行研究。分析粉碎机使用异形筛片对粉碎性能的影响。优化后的异形筛片分别命名为B_1(小圆弧半径R_1=51mm)、B_2(R_1=83mm)、B_3(R_1=93mm),利用流体动力学软件对粉碎室安装3种异形筛片的气流场进行数值模拟,获得粉碎室气流场分布信息。在相同工况下,对装有3种异形筛片的CPS-420型粉碎机进行粉碎性能试验,分析不同筛片对物料粉碎效果的影响。模拟结果表明:粉碎机采用间隔分段圆弧筛片后,粉碎室环流区域产生不同强度的涡旋,能够改变物料环流运动规律,提高物料过筛能力;锤片组扫过区域的气流呈现出较为杂乱无序的分布状态,有利于形成湍流运动,从而增加物料颗粒受打击几率。粉碎性能试验结果表明:锤片饲料粉碎机安装B_3筛片的粉碎机生产效率,较B2、B1筛片分别提高8.1%、16.0%,吨料耗电量分别降低10.5%、15.0%,温升分别降低0.6和0.1℃。优化后的3种异形筛片,能够提高粉碎机的生产效率,降低电能的损耗、改善物料温升,对提高锤片饲料粉碎机性能具有积极意义。     

Numerical study on wave attenuation inside and around a square array of biofouled net cages

In this study, waves propagating through a square array of 16 net cages with different levels of biofouling are numerically studied using a three-dimensional computational fluid dynamics (CFD) model. A porous-media fluid model is adopted to simulate both clean and biofouled netting of a cage array in waves. A numerical wave tank is built, and the oscillating-boundary method is adopted to generate waves. The flow motion is solved by the Navier-Stokes equations, and the free water surface is captured using the volume of fluid (VOF) method. The numerical model is validated by comparing the numerical data with corresponding experimental measurements of a net-cage model with clean netting. To analyze wave attenuation, a numerical analysis of wave elevation both inside and around the cage arrays is presented, which considers the effect of biofouling. Based on the results of the present study, the effect of biofouling on wave elevation is noticeable; the damping effect of the cage array increases with increasing level of biofouling. Furthermore, the incident angle of waves has a noticeable effect on the wave field inside and around the cage array.     

Is it possible to differentiate between environmental and fishery effects on abundance‐biomass variation? A case study of blackspot seabream (Pagellus bogaraveo) in the Strait of Gibraltar

We assessed the potential for simulation and modelling of the blackspot seabream (Pagellus bogaraveo) population in the Strait of Gibraltar to discriminate the environmental effects of fishery impacts. A discrete biomass–abundance dynamic model was implemented to obtain a simulated monthly time series of blackspot seabream biomass. On this simulated time series, autoregressive integrated moving average (ARIMA) models were fitted. The best ARIMA fit provided a significant correlation of 0.76 and persistence index higher than 0.85. The proportion of variance non‐explained by the ARIMA models was correlated with a time series of sea surface temperature (SST) and North Atlantic Oscillation (NAO). The analysis of global, annual and winter correlation between the proportion of variance not explained by the ARIMA models and environmental variables showed that significant associations were not detected over the full time series. Our analysis therefore suggests that overexploitation is the main factor responsible for the commercial depletion of blackspot seabream in the Strait of Gibraltar.     

Ecoviability for ecosystem‐based fisheries management

Reconciling food security, economic development and biodiversity conservation is a key challenge, especially in the face of the demographic transition characterizing many countries in the world. Fisheries and marine ecosystems constitute a difficult application of this bio‐economic challenge. Many experts and scientists advocate an ecosystem approach to manage marine socio‐ecosystems for their sustainability and resilience. However, the ways by which to operationalize ecosystem‐based fisheries management (EBFM) remain poorly specified. We propose a specific methodological framework—viability modelling—to do so. We show how viability modelling can be applied using four contrasted case‐studies: two small‐scale fisheries in South America and Pacific and two larger‐scale fisheries in Europe and Australia. The four fisheries are analysed using the same modelling framework, structured around a set of common methods, indicators and scenarios. The calibrated models are dynamic, multispecies and multifleet and account for various sources of uncertainty. A multicriteria evaluation is used to assess the scenarios’ outcomes over a long time horizon with different constraints based on ecological, social and economic reference points. Results show to what extent the bio‐economic and ecosystem risks associated with the adoption of status quo strategies are relatively high and challenge the implementation of EBFM. In contrast, strategies called ecoviability or co‐viability strategies, that aim at satisfying the viability constraints, reduce significantly these ecological and economic risks and promote EBFM. The gains associated with those ecoviability strategies, however, decrease with the intensity of regulations imposed on these fisheries.